Parker SSD 590P 500A 4Q 220/500V 3ph AC to DC Motor Speed Controller (230V Aux) with Vent Kit

Parker SSD 590P 500A 4Q 220/500V 3ph AC to DC Motor Speed Controller (230V Aux) with Vent Kit - 590P-53350042-A00-U4A0 (590P/0500/500/0041/UK/AN/0/230/0) !

Parker SSD Drives 590P Series 500A Four Quadrant DC Thyristor Drive for 400V Supply with 230V Control supply and including the Vent fan kit (Airflow kit).
Typical Motor output:  up to 210kW (275HP) at 460V DC for fully regenerative DC motor speed and torque control.

Simple to set-up in Digital, fully-isolated Four Quadrant form.
Dimensions:  253mm Wide x 358mm Deep x 700mm High.

Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.

Rated Current:  500A.
Overload:  200% x 10 seconds and 150% x 30 seconds.
Input Current:  410A for Armature + up to 30A for Field.
Input Voltage:  380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply:  230V single phase required for; electronics, pilot for main contactor and 140W cooling fan.

Ambient:  Rated to 40C.
Ventilation space above:  200mm.
Ventilation space below:  210mm.
Ventilation space at sides:  0mm.
Heat Loss at max output:  1590W.

Mountingf:  Panel mount with M8 screw fixings on 680 x 150mm centres.

Part number:  590P-53350042-A00-U4A0.  Previous Part Number was 590P-0500-500-0041-UK-AN-0-230-0, Exactly the same as Eurotherm Drives 590P-0500-500-0041-UK-AN-0-230-0.

Replaces:- SSD and Eurotherm Drives 594-4500, 590C-0720 digital, 590A-0720 and 550-720 analogue products when used with up to 500A motor armature. Requires external back-up high speed fuses.

Parker 590+ Series DC Drives Model: